SRP flat top pistons for SBF

4.030 BORE/ 3.100 STROKE/5.400 ROD LENGTH/ -5CC DOME

Part# 206057
PRICE $450.00

CANTON ALUMINUM EXPANSION TANKS

Aluminum coolant tank for '97-'03 F150's, 2004 Heritage models, and 98-03 Lightning's. Coolant tanks are direct bolt-in upgrades for the primary factory coolant expansion/fill tanks. Tanks feature external sight gauge and accepts aftermarket cap

Part# # 80-240
PRICE $139.95

CANTON ALUMINUM EXPANSION TANKS

Aluminum super charger coolant tank for '98-'03 Ford Lightnings. Tanks are a direct bolt in upgrade for the factory supercharger tank. Tank features external sight gauge and accepts an aftermarket cap.

Part# # 80-241
PRICE $139.95

PROFESSIONAL MASS AIR SYSTEMS VELOCITY MASS AIR METERS

88-95 MUSTANG GT 50# INJECTORS

PRICE $299.00

02-04 MUSTANG GT 19# INJECTORS

PRICE $299.00

AEROMOTIVE FUEL RAIL
98 ½-04 GT BILLET FUEL RAIL KIT

Aeromotive introduces a complete lineup of Billet Fuel Rail Systems for virtually all Ford V-8 engines including pushrod 5.0L as well as SOHC and DOHC 4.6L and the truck 5.4L!! Whether your Ford V-8 has a return-style or returnless fuel system, you'll find a complete, bolt-on fuel rail system is now available.

All Fuel Rail Systems include Aeromotive's Ultra-High Flow CNC-machined Billet fuel rails and custom steel mounting brackets, plus everything you need to complete the installation, from AN SS fuel lines to O-ring port fittings and hose-ends. Return style systems include our superb, boost reference bypass regulator, returnless systems include our high-flow fuel pressure sensor log.

•Includes the same High Flow Fuel Rails used in our Competition and Eliminator Fuel Systems, good to 2,000 HP.
•All required fuel lines are provided, made of 100% AN style SS (stainless steel) for safety and maximum flow.
•Custom, SS Spring-Lock adapter fittings for high pressure supply (and return if required) make for a "plug-and-play" installation.
•1/8" NPT gauge port is provided in SS high pressure adapter, finally allowing returnless systems a place to install a fuel pressure gauge.
•Return style systems include either 13101 or 13109 bypass regulator with 1:1 vacuum/boost reference.
• Regulated systems will adjust base fuel pressure from 30-70 PSI.

PART# 14119
PRICE-$449.00

CPR RACING 72# FUEL INJECTORS

INJECTORS ARE RATED FOR 1330 HP MAX AND 2.5 OHMS OF RESISTANCE.DEKA/SIEMENS STYLE INJECTORS.

PRICE $550.00

HOLLEY 50LB HIGH IMPEDENCE INJECTORS

Set of 8 50 lb/hr injectors.
Installation Notes
To convert lbs/hr fuel flow to cc/minute, multiply lbs/hr by 10.5092.
Features:
• Top-Fed
• Bosch Style
• High Impedance

PRICE $550.00

Moroso 4.6 GT 11 bolt fabricated aluminum valve covers

Fabricated billet aluminum rails to prevent warpage and leaking
Uses stock style gaskets
Comes with knurled oil filler cap and mounting hardware

PRICE $399.00

STEEDA 05-08 CASTER CAMBER PLATES

Steeda's beautiful CNC machined billet camber adjusters allow for consistent, easy camber adjustment on S197 Mustangs. Unlike cheap camber bolts, these plates allow for a much larger range of adjustment and remain consistent under load. Camber bolts will tend to "walk" under loads changing your alignment settings and producing inconsistent handling and tire wear. Our plates will hold their alignment settings under any load or condition.  Our plates allow you to add positive camber to reduce tire wear or negative camber for racing. Camber is easily adjusted by changing camber shims provided with the kit once installed making them perfect for quick camber changes in between rounds of competition.

Steeda's plates are made out of 7075 billet aluminum, not 6061 like the cheap copy cats and have the highest range of adjustment of any system currently available. Don't settle for anything less, buy the best today!

PRICE $172.48

STEEDA CONTROL ARM RELOCATION KIT 05-08 GT

Steeda's control arm relocation kit raises the front roll center of the vehicle, which becomes lower as a result of lowering the vehicle with lowering springs.

Raising the roll center eliminates the issues associated with the lower roll center, making for a great improvement in handling by reducing body roll and improving the front tire contact patch without increasing spring rate or roll bar rate.

This kit will raise the front lower control arm inner mounting location by 3/4 of an inch (19mm). Highly recommended for the open track and competition driver looking to maximize handling.

NOTES:
Relocation kit changes bump steer geometry, Steeda's bump steer kit is highly recommended with this upgrade.
Welding required for installation.
When using the G-Trac Brace with the Control arm Relocation kit two 14mm - 2.0 x 100mm long bolts are required for installation.

PRICE $59.95

STEEDA COLD AIR KIT FOR AN 2005-2008 MUSTANG GT

Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels with Steeda's Cold Air Kit combined with our Custom SCT Tune.

Steeda's lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the HYPERLINK "http://www.steeda.com/products/xcalibrator2.php" SCT XCalibrator 2 - the perfect tool for the job, or the new HYPERLINK "http://www.steeda.com/products/diablo_predator_sport.php" Steeda Predator with Custom Tunes!

The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out . Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.

PRICE $339.00

ROSS PISTONS FOR MODULAR MOTOR (4.6)

PISTONS ARE FOR:

3.572 BORE/3.542 STROKE/5.933 ROD LENGTH/1.220 COMPRESSION HEIGHT

PART# 99803
PRICE $529.95

AUBURN DIFFERENTIAL 7.5 10 BOLT 3.23 AND UP GEAR 28 SPLINE 1988 TO PRESENT

From over the road daily driving to muddy trails and back roads, Auburn Gear's high bias Pro Series and High Performance Series limited-slip differentials outperform standard OEM differentials hands down. They deliver more traction and faster engagement for controlled power transfer and lightning-fast reaction to changing load conditions. No matter what your application - performance or passenger cars, light duty trucks, vans, sport utility vehicles, off road, or recreational vehicles - the Auburn Gear limited-slip differential is engineered to provide smooth torque-sensing operation with bias ratios to meet your performance needs. This superior performance is achieved through an innovative cone clutch design which transfers more power to the high-traction wheel for quick acceleration and tight cornering. Auburn Gear has a full range of differentials for Chrysler, Ford, GM and Toyota vehicles. All are also compatible with all ABS and electronic controls.

PRICE $379.00